Shampoo ice cream homogenizing mixer milk pasteurizer and homogenizer



High pressure homogenizer

High-pressure homogenizer (high-pressure jet crusher) is a kind of equipment for dynamically and continuously performing fluid material crushing, dispersion and emulsification by physical methods. The ultra-high pressure collision causes the suspension of the flowable liquid substance. The ultra-high pressure pump adjusted by the control system feeds the processed material into the high-pressure jet collider, and the pressure is released after the high-pressure jet collider completes the collision. The highest flow rate is 160-200 meters / second, and high-pressure high-speed impact occurs, so that the material can be crushed to the micron level, thereby completing the functions of ultra-fine crushing, emulsification and dispersion.

High pressure homogenizer is a special equipment for homogenizing and refining liquid materials and conveying them at high pressure.

Application:

This equipment is widely used in the production, scientific research and technological development of food, dairy, beverage, pharmaceutical, fine chemical and biotechnology fields. The homogenizer is mainly used for tissue dispersion in the field of biotechnology, sample preparation in the field of medicine, enzyme treatment in the food industry, and in the pharmaceutical industry, cosmetics industry, paint industry and petrochemical industry. The device adopts a stainless steel system, which can effectively separate the surface of the protective body sample and the homogeneous sample contained in the sample. The sample is packed in a disposable sterile homogeneous bag without contact with the instrument. No damage, no temperature rise, no need for sterilization, no need to scrub utensils, and meet the requirements of fast, accurate results and good repeatability.


Structural characteristics:

This equipment consists of frame, transmission box, pump body, pressure gauge, homogenizer and other components. The machine is a vertical arrangement, the motor

It is installed in the frame, the transmission box is installed on the frame, and the pump body is connected with the transmission box. Motor-belt-gearbox shaft curve

The shaft drives the crankshaft to drive the plunger to reciprocate via the connecting rod slider. The movement of the plunger in the pump body forms suction and compression.

The combined valve controls the material liquid to form a pressure. When the machine is used for homogenization, a homogenizer should be equipped. At this time, the material liquid is pressed into the homogenizer.

Through the function of a special homogenizing valve in the homogenizer, the material liquid is fully homogenized to refine the material liquid molecular clusters and the homogeneous material liquid component texture.

When the machine is used as a high-pressure pump, a high-pressure overflow device should be equipped. At this time, the material liquid is pressed into the output port through the pump body, and when the pressure exceeds

When the setting range is set, the overflow valve will automatically open to form internal leakage. When the pressure is lower than the set value, the overflow valve will automatically close to make the material liquid safely transported within a constant pressure range.

Technical parameters: