Introduction of vibrating rod of ultrasonic cleaning machine:
Ultrasound refers to an electromagnetic wave with a frequency of about 20 kHz to 50 MHz. It is a mechanical wave that requires an energy carrier-a medium-to propagate. There is an alternating period of positive and negative pressure in the ultrasonic transmission process. In the positive phase, the medium molecules are squeezed to increase the original density of the medium; in the negative phase, the medium molecules are sparse and discrete, and the medium density decreases. In other words, ultrasonic waves cannot polarize the molecules in the sample, but generate acoustic cavitation between the solvent and the sample, leading to the formation, growth, and burst compression of bubbles in the solution, thereby dispersing and increasing the solid sample. The contact area between the sample and the extraction solvent increases the mass transfer rate of the target from the solid phase to the liquid phase. In terms of industrial applications, the use of ultrasound for cleaning, drying, sterilization, atomization and non-destructive testing is a very mature and widely used technology.
Ultrasonic vibrating rods use high-power and large-amplitude transducers to generate radial vibrations on the rod body. Ultrasonic waves are uniformly generated at 360° near the vibrating rod. Its amplitude is between the ultrasonic cleaner and the processor. Therefore, use The direction is more flexible. The ultrasonic vibrating rod can be used for cleaning with any tank, and it can be placed in any position of the cleaning tank, and it occupies a small volume and can be used very flexibly. Used inside the reactor, it can be used to accelerate the dissolution, accelerate the reaction and prevent the inner wall from scaling.

Features:
1. Ultrasonic cavitation is generated around the vibrating rod, and the ultrasonic energy is very evenly distributed around the rod;
2. The power output of the ultrasonic vibrating rod is not affected by load changes such as liquid level, tank capacity and temperature difference, and the power output is stable and uniform;
3. Ultrasonic vibrating rod is more than 1.5 times the service life of traditional ultrasonic vibrating plate;
4. The round tube design of the ultrasonic vibrating rod makes the vibrating rod easy to install and use;
5. The ultrasonic vibrating rod is sealed and waterproof, safe to use.

Ultrasonic Reactor are mainly suitable for cleaning the inner walls of various tubes and cylinders, such as boiler on-line ultrasonic anti-scaling, vacuum/pressure occasions ultrasonic cleaning, metal pipe inner wall cleaning, and high-power sonochemical processing fields such as Chinese medicine extraction and separation, synthesis and Degradation, biodiesel production, treatment of microorganisms, degradation of toxic organic pollutants, biodegradation treatment, biological cell crushing, dispersion and aggregation, etc.

Applications:
It is widely used in the fields of ultrasonic cleaning, biochemistry, food, chemical and pharmaceutical
industry.
In biochemistry industry, the tubular transducer equipment can be used for emulsification, separation,
homogenization, refining and catalyzing reaction and it can increase production capacity.
The tubular transducer equipment plays an important role in the even stirring of homogenates
in food processing. In the chemical industry, it is suitable for cleaning pipeline, tanks and kettles.
The catalyzing effect of ultrasonic is quite obvious when the tubular transducer equipment used
in the refinement of scavenge oil and palm oil to biodiesel, as the efficiency can be improved more than
tenfold. Therefore, it will have expansive applications in the petro-chemical industry.

According to chemical reaction conditions, materials and purpose different from the general equipment of the following:

1000W the following systems: mainly used for laboratory and small-scale or pilot systems
500W system: for maximum yield of less than 400 L / h of chemical reaction production equipment

1000W system: for maximum yield of less than 800 L / h of chemical reaction production equipment

1500W system: for production of 200-1200 L / h of chemical reaction production equipment

2000W system: for production of 300-1600 L / h of chemical reaction production equipment