Jimei Dairy Machine Milk Powder Equipment

The whole line including:1. Water Treatment section                  2. Milk Receiving Section                 3. Preparation Section4. Concentration Section                      5. Dry

Featured Products

The whole line including:

1. Water Treatment section                  2. Milk Receiving Section                 3. Preparation Section
4. Concentration Section                      5. Drying section                              6. Packaging Section
7. CIP Cleaning Section                        8. Compressor                                9. Boiler
10. Chiller                                             11. Installation Material

1.Milk weight tank2.Milk receiving tank3.Centrifugal pump4.Milk seperator5.Vaccum degasser
6.Plate heat exchanger7.Outdoor milk tank8.Ice water tank9.Ice water machine10.Cooling tower
11. Rotor pump12.Fermentation tank13.Seed tank14.Plate pasteurizer15.Homogenizer
16.Temperature holding tank17.Centrifugal pump18.Mixing tank  

Jimei Dairy Machine Milk Powder Equipment
General process steps in batch and continuous production of butter

1. Milk reception 2. Preheating and pasteurisation of skimmilk 3. Fat separation 4. Cream pasteurization 5. Vacuum deaeration (when used) 6. Culture preparation (when used) 7. Cream ripening and souring (when used) 8. Temperature treatment 9. Churning/working (batch) 10. Churning/working (continuous) 11. Buttermilk collection 12. Butter silo with screw conveyor 13. Packaging machines

If you need a free technology support and proposal or processing flow chart, Contact with us soon.

Milk processing line
NO.NAMEMAIN TECHNOLOGY PARAMETER
1MILK RECEIVE\STORAGE\AND CREAM SEPARETOR UNIT
2electron pound scale             maximum weighing 500KG
3milk weighing tankmade of SUS stainless steal, single layer, product feeded in through 40 mesh filter net, CIP cleaning ball
4milk acceptorSUS304 stainless steel, single layer, CIP cleaning ball
5milk pumpSUS304 stainless steel, pump lift 24M, Hard Alloy Mechanical Seal, Inner Shell Bright-Polished
6twin piping filterSUS304 stainless steel, two pipe, Stainless Steal Filter Element 100 Mesh
7dish separatorauto residue discharge
8chiling tankSUS304 stainless steel, alveolate jacket, attached with compressor
9milk pumpSUS304 stainless steel, pump lift 24M, Hard Alloy Mechanical Seal, Inner Shell Bright-Polished
10PREPARING UNIT
11blending tankSUS304 stainless steel, heat insulated, top off- center votical agitator, conical head, airtight manhole, breather valve, digital readout thermometer, anti-eddy baffle, supporters with adjustable feet
12milk pumpSUS304 stainless steel, pump lift 24M, Hard Alloy Mechanical Seal, Inner Shell Bright-Polished
13mini set of plate-type heat exchangerSUS304 stainless steel, two stages,
14high speed emulsification tankSUS304 stainless steel, heat insulated, bottom high speed emulsifier, digital readout thermometer, supporters with adjustable feet
15milk pumpSUS304 stainless steel, pump lift 24M, Hard Alloy Mechanical Seal, Inner Shell Bright-Polished
16twin piping filterSUS304 stainless steel, two pipe, Stainless Steal Filter Element 100 Mesh
17sterilizing, homogenizing unit
18UHT sterilizertub-type, sterilzing temperature 137 C, holding time 4S, full automatic control
19high pressure homogenizer40MPa, (starting box included)
20temperature holdingSUS304, holding 300S
21distributing plateSUS304, 3 holes
22cheese\butter processing unit
23bufferying tankSUS304 stainless steel, heat insulated, top off- center votical agitator, conical head, airtight manhole, breather valve, digital readout thermometer, anti-eddy baffle, supporters with adjustable feet
24milk pumpSUS304 stainless steel, pump lift 24M, Hard Alloy Mechanical Seal, Inner Shell Bright-Polished
25cream seperator 
26bufferying containerSUS304, with cover
27milk pumpSUS304 stainless steel, pump lift 24M, Hard Alloy Mechanical Seal, Inner Shell Bright-Polished
28butter-churnerSUS304, stepless timing
29cheese vatSUS304, with heating jacket and insising device
30pressorSUS304, 6 heads
31mouldSUS304, 10L, with cover
32yogurt fermentation unit
33fermentation tankSUS304 stainless steel, heat insulated, top off- center votical agitator, conical head, airtight manhole, breather valve, digital readout thermometer, anti-eddy baffle, supporters with adjustable feet
34rotary pumpSUS304 stainless steel, Hard Alloy Mechanical Seal, manual stepless shift
35plate coolerSUS304, single stage, milk discharge at 4C
36rotary pumpSUS304 stainless steel, Hard Alloy Mechanical Seal, manual stepless shift
37filling unit
38higher position tankSUS304 stainless steel, heat insulated, top off- center votical agitator, conical head, airtight manhole, breather valve, digital readout thermometer, anti-eddy baffle, supporters with adjustable feet
39pasteurized milk filling machine 
40yogurt filling machine 
41CIP system
42auto CIP systemouter coat of SUS304 stainless steel material, inner shell of SUS316, single cleaning way, Concentrated acid/alcali tank adding system based on US technology, 100L× 2 acid/alcali Concentrate tanks
43CIP return pumpSUS304 stainless steel, pump lift 24M, Hard Alloy Mechanical Seal, Inner Shell Bright-Polished
44  installation partwhole milk processing line installation and commissioning


Benefit:

1. Opportunity to realize products with customized recipes.
2. Opportunity to produce more than one product with the same processing line.
3. High quality of the final product keeping an elevated nutritional value.
4. Wide customization of the final product.
5. Maximum yield, minimum production waste.
6. Highest energy savings thanks to the most advanced technologies.
7. Complete line supervision system through monitoring of every process phase.
8. Recording, visualization and printing of all daily production data.

production nameautomatic dairy products processing line machinery
manufacturerShanghai Jimei Food Machinery Co.,Ltd
warranty12 months for free and lifelong free technical support



 
Competitive Advantages

Well and High Quality Control , 
Prompt Delivery , 
New Product , 
Customer's Design and Logo are Welcome , 
Competitive Prices , 
Earth-friendly Products , 
In a Variety of Design , 
Small Order Acceptable , 
ODM Accepted , 
OEM Accepted
 
Safety/Quality Approvals 

CE ISO GAP 3A
 
Trade Information 

1. Package- all equipments packed in nylon cloth and plastic film worthy of sea shipping. 
2. Payment- 30% of total amount paid by T/T in advance and the balance paid by T/T after inspection and before shipment. 
3. Delivery- in 60 days upon receipt of down payments. 
4. Warranty-all machines & equipments are of one year warranty and life long maintenance offered by seller. 
5. Installation- the seller arrange engineer to set up the equipments and train the operation workers for free, till qualified products are produced and maintenance in normal running, the buyer bear the round air tickets and local accommodation for the seller's engineer.

Jimei Dairy Machine Milk Powder Equipment


Description
:

The milk fat content is standardised in a direct standardisation system. Standardised milk used for producing whole milk powder is not normally homogenized.

In the production of dried whole milk the heat treatment must be so intense that the lipases will also be inactivated. This normally involves high-temperature pasteursation to a negative peroxidase test.

Falling-film evaporators are generally used for concentration, which is carried out in two or more stages to a DS content of 45 - 55%.

 

Two-stage drying:

The last traces of moisture are the most difficult to remove, unless high outlet drying temperatures are used to provide a sufficient driving force. As elevated outlet drying temperatures can have a detrimental effect on powder quality, it is essential to operate at lower outlet temperatures with dairy products. If the moisture content of the resulting powder is still too high, an after-drying stage is incorporated after the spray dryer in a two-stage process as illustrated in figure .

Two-stage drying methods for producing powdered milk product combine spray drying as the first stage and fluid bed drying as the second stage. The moisture content of the powder leaving the dryer chamber is 2 - 3% higher than the final moisture content. The function of the fluid bed dryer is to remove excess moisture and finally to cool the powder down. 

The powder is packed in cans, paper bags, laminated bags or plastic bags, depending on the quality and the requirements of the consumers. 

Milk powder production requires the drying of liquid milk into a powder in which aromas, flavours and colouring as well as many important components such as protein, fat, carbohydrate, vitamins, minerals etc. are retained. Additional challenges is a uniform moisture content, particle structure and particle size distribution, solubility, dispersability and wettability.
Jimei Dairy Machine Milk Powder Equipment

Ultra-high temperature, or UHT milk is ultra-pasteurized milk that comes in sterilized containers

It's real milk, just like the kind you buy chilled in the dairy aisle, but its special pasteurization and packaging process gives it a shelf life of several months.

While most milk goes through a standard pasteurization process, UHT milk goes through ultra-pasteurization, which safely heats the milk to a higher-than-usual temperature. This, like regular pasteurization, kills bacteria in the milk that may be harmful or cause the milk to spoil. It's then packaged in sterilized containers, also known as aseptic packaging, which helps keep the milk fresher longer.

UHT milk can sit out unrefrigerated for about three months, and this can vary by brand. Once the container is opened, the milk should be refrigerated and has the same shelf life as other milk (seven to ten days).

Technical parameters
productionWhole milk powder
capacity1.5T/D-100T/D
Endproduct packageTin, plastic bag,etc

Certifications
Jimei Dairy Machine Milk Powder Equipment


Our Company

Jimei Holdings Group of China - Shanghai Jimei Food Machinery Co., Ltd. is a collection of scientific research, production and service as one of professional manufacturer of liquid beverage food machinery, high-tech enterprises;the company was founded in 1989 and currently has become a leader in the domestic food machinery industry.
Jimei Dairy Machine Milk Powder Equipment
Jimei Dairy Machine Milk Powder Equipment

The company's main products include: automatic roof-type carton packaging machine, automatic paper brick packaging machine, automatic paper pillow type packing machine, automatic spray sterilizing unit, PET triple filling unit, UHT tubular , plate sterilization machine, aseptic liquid flexible packaging machines, etc., and the formation of fruit and vegetable drinks production line, liquid dairy production line containing carbonated beverage production line, pure water production line, milk powder production line, cold production lines, concentrated fruit juice and jam production line, canned fruit production line eight series as the main supporting parts of the production line equipment Vice scale Group production mode.
Jimei Dairy Machine Milk Powder Equipment
Jimei Dairy Machine Milk Powder Equipment

FAQ

1.How long can I receive your reply after I send my inquiry?
We will reply you within 12 hours on workday.
2.Are you a manufacturer or a commercial company?
We are a manufacturer, and we have a foreign trade department, we market our own products.
3.What products can you provide?
We mainly produce beverage production machinery and equipment.
4.What are the application fields of your products?
Our products are mainly used by beverage factories or individuals who want to run a milk production plant.
5.Can you provide custom products?
Yes, custom products are our main products. We can develop and manufacture products according to customer's drawing or sample. Saving customer's time on finding corollary equipment.
6.How's your production capacity?
Our annual output is about 800,000 sets.
7.How many employees do you have?
We have over 100 employees, including several technicians and engineers.
8.How do you ensure your product quality?
We conduct inspections in every production procedure, and for finished products, we will take 100% inspection depend on international standards according to customer's requirements.
9.Payment?
We will confirm the payment with you when quoting, like FOB, CIF, CNF or others.
In batch production, we accept 30% deposit, balance against the copy of B/L.
T/T is the main payment, and L/C is acceptable as well.
10.What's your delivery method?10.What's your delivery method?
We commonly use sea transportation, using container to deliver the goods through Shanghai Port.
11.Where do you mainly export your products?
Our products are mainly exported to Mexico, Saudi Arabia, India, Algeria, Dubai, Congo, African countries, etc.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours